CF Unity issue
#1
Posted 01 February 2019 - 02:28 AM
#2
Posted 01 February 2019 - 02:29 AM
#3
Posted 01 February 2019 - 10:05 AM
Do you have 2 terrains in the Hierarchy?
Have you looked underneath?
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#4
Posted 01 February 2019 - 11:19 AM
Do you have 2 terrains in the Hierarchy?
Have you looked underneath?
I only have 1 terrain.....
I'm stumped, I cant find the spline anywhere in the list but it keeps popping up with the error message...
#6
Posted 01 February 2019 - 03:16 PM
I see 2 overlay images in the paint pallet, any reason for that?
Let's see your library and the layer it's happening on.
In your 3rd pic down it looks like a highlighted water plane,
which brings me to another question, why so many waterplanes?
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#7
Posted 01 February 2019 - 03:22 PM
Have you tried deleting and redrawing the spline?
Check the control points and make sure they are not crossed or
any doubles on top of one another.
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#8
Posted 01 February 2019 - 03:25 PM
I see 2 overlay images in the paint pallet, any reason for that?
Let's see your library and the layer it's happening on.
In your 3rd pic down it looks like a highlighted water plane,
which brings me to another question, why so many waterplanes?
I have a bunch of winding streams so I had to use multiple water planes...
The first overlay is the original, the second is my photoshopped one without trees etc...
I also deleted every spline on the hole and that tear is still present
#9
Posted 01 February 2019 - 03:39 PM
Ok, whichever layer that is in the library, lower the grid fill
to say 1.5 and recalculate. It appers that your control points
are very close for a fwy or green, I would set the points per meter
a bit lower, they only need to be close for sharp angles like in a bunker.
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#10
Posted 01 February 2019 - 03:49 PM
Ok, whichever layer that is in the library, lower the grid fill
to say 1.5 and recalculate. It appers that your control points
are very close for a fwy or green, I would set the points per meter
a bit lower, they only need to be close for sharp angles like in a bunker.
Ok I'll give that a shot tonight and hope it works
#11
Posted 01 February 2019 - 10:30 PM
Just a note: The grid fill will recalculate when you change it,
the points per meter will change with a re-draw.
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#12
Posted 01 February 2019 - 10:53 PM
Just a note: The grid fill will recalculate when you change it,
the points per meter will change with a re-draw.
tried and nothing changed... It looks like a little patch of rough except there are no splines anywhere near it. Keeps telling me it has less than 3 points but i Can't find even one to delete it.. I deleted all the splines on the hole, recalculated the whole course and it was still there. Here is what it looks like closeup with no other splines built on the hole.
#13
Posted 01 February 2019 - 11:27 PM
I know I've had this problem and posted it in the old private beta forum.
I'm searching there now but a lot to go through.
Could you turn on the shaded wireframe and have a look
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#15
Posted 02 February 2019 - 02:32 AM
After turning debug on, you went to the hierarchy panel, typed Spline into the search and clicked on every Spline and verified that it never was selected?
You also tried clicking on the misshapen mesh after Debug was turned on and it wasn't selectable?
It may not show if it somehow thinks it was never constructed but I find it hard to believe a mesh can be present and it not show in the hierarchy on debug. Maybe it is not named Spline if that crapped out but I have no idea what it would be named.
#16
Posted 02 February 2019 - 12:34 PM
Found my old post but never got a solution.
I had 2 points that I couldn't delete.
Bugs the crap out of me when I can't find a solution.
I'll be happy to look with you on Skype if you share your screen send me an invite skype name noputt007
Dry Gulch...................Released Smithfield Golf Club...........Released
Millstone Golf Club....Released The Walker Course............Released
Kingsmill Woods Course...Released Pine Lake Golf Club..........Released
Woodhaven Golf Club (9) Released The Reserve at Keowee...Released
Cliffs at Keowee Vineyards..Released The Ace Club...................Released
Dry Gulch 2..........Released Blackberry Oaks.............Released
#17
Posted 02 February 2019 - 03:50 PM
- RobC and NoPutt like this
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users