Jump to content


Photo

Should I texture the entire image to begin?


  • Please log in to reply
6 replies to this topic

#1 Jugador

Jugador

    Member

  • Members
  • PipPip
  • 27 posts

Posted 11 May 2019 - 06:17 PM

  Hey guys...before I get too far along, just wondering if I should place a texture over the entire image first, or can I do one hole at a time? Here's a pic of what I'm doing. Is this right? Thanksp.jpeg?fv_content=true&size_mode=5



#2 NoPutt

NoPutt

    Advanced Nit-Picker

  • Members
  • PipPipPip
  • 2,786 posts
  • LocationSouth Carolina

Posted 11 May 2019 - 06:58 PM

Image not loading for me.

Real or Fictional course?


" I haven't had this much fun since someone dropped a banana
down my pants and turned a monkey loose"

Dry Gulch Golf Club (Released)  

Millstone Golf Club (Released)

The Cliffs at Keowee Vineyards (Released)

Pine Lake Golf Club (Released)

Dry Gulch v2  (Released)

The Walker Course at Clemson (Released)

The Reserve at Lake Keowee  (Nicklaus design) (Released)

Woodhaven Golf Club,  Par 3 Course  (Released)

Smithfields C.C.  (Released)

Kingsmill Resort, Woods Course (Released)

Trackman Par 3 Party   ( Release up to TRACKMAN)

The Ace Club  (Gary Player)  (Released)

The Olde Farm (In Production)


#3 Jugador

Jugador

    Member

  • Members
  • PipPip
  • 27 posts

Posted 11 May 2019 - 08:00 PM

Image not loading for me.

Real or Fictional course?

  Hmmmm...that's weird. It's showing for me. Anyway, it's a real course that Joe put together for me from an image and lidar. Here's another attempt to link the pic...https://www.dropbox....mage01.jpg?dl=0

 

  BTW...just played The Ace Club. Amazing job...I really like the stone tee boxes, the waterfall, and bridges. 



#4 Joe Habiger

Joe Habiger

    Advanced Member

  • Members
  • PipPipPip
  • 748 posts
  • LocationCoon Rapids, MN

Posted 13 May 2019 - 08:29 AM

Oh that's right, that is the Texas course I did for you.

 

Being your first course I would just do one hole at a time for now, even if you put a rough texture around the whole course and put down many buffer shapes to help I still believe your suppose to texture one hole at a time like we did before. If you put down one texture now I don't think you'll see where you need to put shapes down for tees and such. 

 

I would get the course to a point where you have all holes laid down first and then worry about the final steps. Make sure you put an OB around the course so you can play it.


  • Intel I7 3770k
  • Asus Sabertooth Z77
  • EVGA GeForce GTX 1070
  • G.Skill Trident X Series 16GB (PC3 19200)
  • Samsung 840 Pro Series 256GB SSD
  • Samsung 850 EVO 512GB SSD
  • Sound Blaster ZX Soundcard
  • SeaSonic X750 Gold Power Supply
  • NZXT Phantom 410 Gunmetal Green Case with Green LED throughout
  • Corsair Hydro Series H100i Liquid Cooling
  • "43 inch Vizio 4k Monitor

#5 Stingreye

Stingreye

    Advanced Member

  • Members
  • PipPipPip
  • 158 posts
  • LocationSouthern California

Posted 13 May 2019 - 06:37 PM

I think Best practice is green outwards,

Green, bunkers, fairways, rough for each hole.  Otherwise you will have to hide splines to see what you are doing and compiling splines with splines hidden has corrupted splines for me before (not a corrupted spline like crossing fairway and rough, I am mean literally you have to delete it and start over there as there is a error you can't get past).



#6 Jugador

Jugador

    Member

  • Members
  • PipPip
  • 27 posts

Posted 14 May 2019 - 09:03 AM

Oh that's right, that is the Texas course I did for you.

 

Being your first course I would just do one hole at a time for now,

I would get the course to a point where you have all holes laid down first and then worry about the final steps. Make sure you put an OB around the course so you can play it.

  Yes sir, that's the one...okay, sounds like a plan. Again,  thanks again for the image and lidar. In the couple of holes I've done so far, the elevations look exactly like they are in real life...very cool! :D



#7 Jugador

Jugador

    Member

  • Members
  • PipPip
  • 27 posts

Posted 14 May 2019 - 09:50 AM

I think Best practice is green outwards,

Green, bunkers, fairways, rough for each hole.  Otherwise you will have to hide splines to see what you are doing and compiling splines with splines hidden has corrupted splines for me before (not a corrupted spline like crossing fairway and rough, I am mean literally you have to delete it and start over there as there is a error you can't get past).

  Greens, bunkers, fairways then rough...got it. I love the course layout of The Los Angeles CC. I guess since it's a beta you want feedback. The only thing I noticed was the "shot point" on #17 fairway was missing. (at least I couldn't see it). I don't know if it's that big a deal or not, just saying. The clubhouse looks great!






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users