4 replies to this topic

[QBL_MrCobra]

Hi guys,

Look at the picture, On a lot of my hole in the course the cup is awning in the air why? Got any idea?

I got so much bizarre thing happening with that course.

Thank you for your help

MrCobra

[DoGgs]

Never seen that before lol   Did you alter the contour of the green without refreshing the splines then went into build mode?  just a thought, although like i say i have never seen that before.

[bortimus]

Just throwing some things out here to check.

Is the green mesh:

Lowered? (Very low or negative blend or depth number)
Locked?
Surrounded by another locked or lowered mesh?
Surrounded by a cutout mesh?

Does anything look strange in the Shaded Wireframe view?

Is there a child mesh somewhere on the green?

What is your current mesh height on the course build? Should be at least .15

Maybe something will reveal itself. Hope you figure it out.

[QBL_MrCobra]

Hi guys,

It's fixe. I decide to create a new green spline and everything is good now.

thank you for your help.

 

MrCobra

[kkolaja]

I am having the same problem.  Redrew the splines and rebuilt course but still have a 2-3 inch lip guarding every single hole?  

 

https://www.dropbox....pguard.png?dl=0