Advanced Member
Posted 27 January 2017 - 10:48 AM
There are two bugs with the latest release for Skytrak users. When you start PG, it will start in putting mode instead of normal mode. You have to toggle normal mode on or else you get nothing but shots that launch with a 0 degree launch angle. The second bug is that after you hit one shot after turning normal mode one, the putting mode/pin/status indicators that are on the bottom right of the display disappear.
Can these be fixed ASAP?
Thanks.
Administrator
Posted 27 January 2017 - 04:12 PM
I pushed a fix for this...
Advanced Member
Posted 27 January 2017 - 10:03 PM
Thanks for fixing the first part of the issue. However, the putting mode/pin/arm button still disappear after one shot. Can this be fixed?
Advanced Member
Posted 28 January 2017 - 04:27 AM
Played tonight on 2 different courses and had trouble getting the first tee shot to read on almost every hole. I couldn't tell if it was in putt mode like yesterday since the shot didn't register on the console. If I went into the console and toggled Normal mode on and armed the ST, the tee shot read normally, as did subsequent shots on the hole. But on the next tee, the initial shot wouldn't read unless I remembered to toggle Normal mode on first.
Any fixes coming soon?
Advanced Member
Posted 28 January 2017 - 10:22 AM
Me too! Two times Skytrak stopped working in front 9. Always in the tee shot. No good! And I couldn't fix it without restarting JNPG. I'm not too glad to pay simulation fees for this kind of product.
Fix very soon please!
Those crazy spins in 10 m chips are also something that needs to get fixed badly.
Administrator
Posted 28 January 2017 - 03:12 PM
We have fixed this with another push this morning. In addition we are looking at the short chips and hope to push a fix for that by end of the weekend
Advanced Member
Posted 28 January 2017 - 03:29 PM
We have fixed this with another push this morning. In addition we are looking at the short chips and hope to push a fix for that by end of the weekend
Thanks! Looking forward to the fixes!!!
Advanced Member
Posted 29 January 2017 - 10:15 PM
Great to hear 
. Thanks!
Newbie
Posted 02 February 2017 - 10:05 AM
Green grid is not visible. I have to set gr_ballOffset0.1 and gr_gridOffset0.05 throught the console. Please fix it.
Newbie
Posted 02 February 2017 - 11:09 AM
When I use the console command sim_sideOffset on some tees happens that a ball is on left side of tee instead of right side. A have to use Aim View command (F3) for fixing of the ball position. Please fix it.
Newbie
Posted 19 February 2017 - 05:13 PM
So I know you said this was fixed in the update but this is still happening to me though not as often. Usually doesn't start happening until about hole 12-15 and then will do it around 50% of the time where I finish a hole and then the next hole it is stuck in putt mode and I have to toggle it to get it out. Any ideas? Very annoying
0 members, 0 guests, 0 anonymous users
