Jump to content


Photo

Tropicana.unitypackage


33 replies to this topic

#1 Kablammo11

Kablammo11

    Obscure Person

  • Members
  • PipPipPip
  • 3,950 posts

Posted 16 January 2017 - 06:17 PM

Your ready-to-go tropical island is finally ready. Including trees, bushes, grasses, audio loops, miscellany objects and all the same CF LL settings and textures used for my Aroha course. 

Sorry about the long wait after the announcement, this was originally  intended to be issued through a working Steam Workshop. I understand some problems were encountered with that, no point in waiting any longer, might as well release it now. 

 

O3ATqX0.jpg

 

Anyway, there you are. Download the package, open a new project, import the package and everything in it, then go and design your own tropical island paradise...

 

https://www.dropbox.com/s/t66vgrc979y4zfg/Tropicana.unitypackage?dl=0

 

The file is delivered "as is":

I will not offer any technical support whatsoever - or care either way if it's good, bad or ugly.

 

Please download this file only if you really intend to do something with it: My free Dropbox account has a download cap per time, so too many downloaders might trigger a blockage.

 

Ta!


  • olazaboll, highfade, RobC and 6 others like this

>>>>>>> Ka-Boom!





• Mulligan Municipal • Willow Heath • Pommeroy • Karen • Five Sisters • Xaxnax Borealis • Aroha • Prison Puttˆ

• The Upchuck   The Shogun  • Black Swan (•)

 

<<<<<


#2 jimbob59

jimbob59

    Advanced Member

  • Team Members
  • PipPipPip
  • 199 posts
  • LocationNewcastle, England

Posted 17 January 2017 - 10:08 AM

Much appreciated K11

Thanks for sharing

jim



#3 alannala

alannala

    Advanced Member

  • Members
  • PipPipPip
  • 42 posts
  • LocationKent, England

Posted 17 January 2017 - 01:14 PM

Very kind. Thank you. Just started a new course so will not be using it until that one is finished. However, really looking forward to developing my own tropical paradise after that.



#4 PELO

PELO

    Advanced Member

  • Members
  • PipPipPip
  • 159 posts

Posted 17 January 2017 - 07:07 PM

Thank you, K11. You are not only good with the English language but you're also generous.



#5 clubcaptain

clubcaptain

    Advanced Member

  • Members
  • PipPipPip
  • 1,171 posts

Posted 17 January 2017 - 08:30 PM

Created 2 holes as a starter but the splines are hovering above the terrain. Used the solution in the Q&A section of building the splines (several times) but I can't get them to hug the terrain.


PC specs...

Intel core I73770k 3.5 GHZ
16 Gb Corsair vengeance DDR3 1600MHZ/PC12800
Asus mobo PB8277-V Lx
Nvidea GeForce GTX970 4GB
X box 360 wired controller
Windows 10 home  64 bit


#6 bortimus

bortimus

    Advanced Member

  • Members
  • PipPipPip
  • 1,120 posts

Posted 17 January 2017 - 09:22 PM

Check the Y coordinate of the terrain in the inspector window. Make sure the terrain is at (0,0,0)
  • nstone73 likes this

#7 nstone73

nstone73

    Advanced Member

  • Members
  • PipPipPip
  • 126 posts
  • LocationDenver CO

Posted 17 January 2017 - 09:41 PM

Check the Y coordinate of the terrain in the inspector window. Make sure the terrain is at (0,0,0)

Thanks Bortimus, I was seeing the same issue when putting down my shapes too....my y coord was at -4. Changing it does change the shoreline though....should I be adding 4 to the y coordinate on the waterplane to compensate for this?



#8 clubcaptain

clubcaptain

    Advanced Member

  • Members
  • PipPipPip
  • 1,171 posts

Posted 18 January 2017 - 01:08 AM

Why would it be at -4 ?


PC specs...

Intel core I73770k 3.5 GHZ
16 Gb Corsair vengeance DDR3 1600MHZ/PC12800
Asus mobo PB8277-V Lx
Nvidea GeForce GTX970 4GB
X box 360 wired controller
Windows 10 home  64 bit


#9 clubcaptain

clubcaptain

    Advanced Member

  • Members
  • PipPipPip
  • 1,171 posts

Posted 18 January 2017 - 01:46 AM

Changing from -4 to zero did the trick thanks.


PC specs...

Intel core I73770k 3.5 GHZ
16 Gb Corsair vengeance DDR3 1600MHZ/PC12800
Asus mobo PB8277-V Lx
Nvidea GeForce GTX970 4GB
X box 360 wired controller
Windows 10 home  64 bit


#10 Kablammo11

Kablammo11

    Obscure Person

  • Members
  • PipPipPip
  • 3,950 posts

Posted 18 January 2017 - 12:00 PM

What the? Sorry about that guys - yes, the terrain always must be 0/0/0. Bortimus averted me of this issue and I was sure I had fixed that, but for some reason it did not stick to the package... The cause is probably a handling error committed by me and overlooked afterwards.

If you correct the terrain altitude, you will need to move all the existing objects up correspondingly. And also raise the ocean a bit... 


>>>>>>> Ka-Boom!





• Mulligan Municipal • Willow Heath • Pommeroy • Karen • Five Sisters • Xaxnax Borealis • Aroha • Prison Puttˆ

• The Upchuck   The Shogun  • Black Swan (•)

 

<<<<<


#11 PELO

PELO

    Advanced Member

  • Members
  • PipPipPip
  • 159 posts

Posted 18 January 2017 - 09:50 PM

I have downloaded this package and  have installed it into Unity. Now, when I search for palm trees I don't see any prefabs that I can drag onto the terrain, all I see with regard to palm trees is big red figures that have only an outline of palm trees. Has anyone else had this peculiarity? Thanks.



#12 Justin9926

Justin9926

    Advanced Member

  • Members
  • PipPipPip
  • 622 posts

Posted 19 January 2017 - 05:26 PM

Thanks for sharing the Tropicana unity package and all of its assets K11. Much appreciated.

 

Justin

 

Asus ROG G751JT-CH71 Gaming Laptop

2.5 GHz Intel Core i7– 4710HQ

Nvidia GTX 970M 3GB GDDR5

16 GB DDR3

Windows 10 64-bit


#13 PELO

PELO

    Advanced Member

  • Members
  • PipPipPip
  • 159 posts

Posted 19 January 2017 - 11:00 PM

Is anyone able to use these palm trees? I can't. Where are they? All I see is blobs of red material.



#14 Kablammo11

Kablammo11

    Obscure Person

  • Members
  • PipPipPip
  • 3,950 posts

Posted 20 January 2017 - 11:12 AM

PELO, as long as you are the only one reporting this issue, I have to assume that the problem must be something local. Could you perhaps post a screen shot of your blobs? 

Perhaps delete, then re-import the Speedtree folder from the package?


>>>>>>> Ka-Boom!





• Mulligan Municipal • Willow Heath • Pommeroy • Karen • Five Sisters • Xaxnax Borealis • Aroha • Prison Puttˆ

• The Upchuck   The Shogun  • Black Swan (•)

 

<<<<<


#15 Mike Jones

Mike Jones

    Advanced Member

  • Administrators
  • 6,145 posts

Posted 20 January 2017 - 11:25 AM

Is anyone able to use these palm trees? I can't. Where are they? All I see is blobs of red material.

 

I'm sure you're using the wrong version of Unity, you should be using Unity 5.2.3



#16 DPRoberts

DPRoberts

    Advanced Member

  • Members
  • PipPipPip
  • 1,285 posts

Posted 20 January 2017 - 01:31 PM

Thank you K11. Will be great not only for building something unique but a chance to see the inner workings of Kablammo Corp up close.



#17 PELO

PELO

    Advanced Member

  • Members
  • PipPipPip
  • 159 posts

Posted 20 January 2017 - 03:07 PM

PELO, as long as you are the only one reporting this issue, I have to assume that the problem must be something local. Could you perhaps post a screen shot of your blobs? 

Perhaps delete, then re-import the Speedtree folder from the package?

Thanks, K11. I have re-imported your entire file but to no avail. My graphics drivers are fairly new. Naturally, as you have said, if no one else has the problem then it must reside on my side. All the best to you.



#18 clubcaptain

clubcaptain

    Advanced Member

  • Members
  • PipPipPip
  • 1,171 posts

Posted 22 January 2017 - 08:23 PM

Raised the base plot from -4 to zero and raised the ocean slightly and am getting these large dark patches which follow the cursor as you navigate around. 

darkpatches_zpsfbkog2ql.jpg


PC specs...

Intel core I73770k 3.5 GHZ
16 Gb Corsair vengeance DDR3 1600MHZ/PC12800
Asus mobo PB8277-V Lx
Nvidea GeForce GTX970 4GB
X box 360 wired controller
Windows 10 home  64 bit


#19 PELO

PELO

    Advanced Member

  • Members
  • PipPipPip
  • 159 posts

Posted 23 January 2017 - 06:28 AM

I'm sure you're using the wrong version of Unity, you should be using Unity 5.2.3

I am using version 5.2.3. Thank you.



#20 pingzing

pingzing

    Advanced Member

  • Members
  • PipPipPip
  • 939 posts
  • LocationQld Australia

Posted 05 October 2017 - 08:22 AM

Thank you k11 

 

Nice objects in here that will suit my new course and appreciate you sharing them 

 

Cheers 





Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users