Jump to content


Photo

House Building Package


  • Please log in to reply
46 replies to this topic

#41 olazaboll

olazaboll

    Advanced Member

  • Members
  • PipPipPip
  • 559 posts

Posted 15 February 2017 - 07:59 PM

bMYDM2a.jpg

 

Looking absolutely great :) ..... 

Ok ... before I go and start (try ) building this ... If I put houses like this on a 700 yds stretch ... would that take a massive FPS hit ?



#42 DPRoberts

DPRoberts

    Advanced Member

  • Members
  • PipPipPip
  • 1,610 posts

Posted 15 February 2017 - 10:33 PM

Probably not. Based on your number, with buildings 2 blocks wide, you're looking at about 100 buildings (640m/6m). If you use the same roof texture between buildings, it's 4 textures - brick, painted brick, windows, and roof. Each building should be less than 150 tris. Give it a shot and report back!

#43 Justin9926

Justin9926

    Advanced Member

  • Members
  • PipPipPip
  • 760 posts

Posted 16 February 2017 - 07:40 PM

Finally got around to using your house builder. Excellent job. I didn't think there would be any possible way I would ever be able to build  houses on my own. Needless to say, I've created over 11 different buildings for my latest course. Thank you for taking the time to create this program  for the community.

 

Thanks again, Justin

 

PS. in case it hasn't been mentioned. The double garage door block,(3mx3m_C3R3_longdoor) the end textures do not  match the front texture

Capture_zpsztonkdwc.jpg


  • DPRoberts likes this

Asus ROG G751JT-CH71 Gaming Laptop

2.5 GHz Intel Core i7– 4710HQ

Nvidia GTX 970M 3GB GDDR5

16 GB DDR3

Windows 10 64-bit


#44 olazaboll

olazaboll

    Advanced Member

  • Members
  • PipPipPip
  • 559 posts

Posted 16 February 2017 - 08:30 PM

Ok ... had great fun following your 40 minute turorial ... a lot of stop and rewinding but after approx 2 hours I came up with this ... I notices I missed top on the Bay Window ... and it might need to be moved in a few inches from the right corner. Is it a way to update a Prefab ?

 

Also notced on the door block that the bricks goes the wrong way on the wall arround the corner... dont know if its me or ,,,,, ???

 

73f7cdad11.jpg



#45 olazaboll

olazaboll

    Advanced Member

  • Members
  • PipPipPip
  • 559 posts

Posted 17 February 2017 - 06:41 PM

Ok ..need to bump this since I used my edited post from yesterday ... see above...



#46 DPRoberts

DPRoberts

    Advanced Member

  • Members
  • PipPipPip
  • 1,610 posts

Posted 17 February 2017 - 09:59 PM

A few of the blocks with doors need fixing as you've stated. Others have pointed out in this thread.

As far as the bay, either bump in from the end a little so no z fighting or scale the whole thing in the inspector. Change X, Y, and Z in scale to 0.9 should look fine.

There is a roof piece to go on the bay as well if you want but that will have to be scaled the same dimensions if you want it to snap correctly.

Get one building how you want and then you can just duplicate the whole thing by box selecting from above with mouse click and drag.

#47 olazaboll

olazaboll

    Advanced Member

  • Members
  • PipPipPip
  • 559 posts

Posted 17 February 2017 - 11:16 PM

Thanks DPR ... I manage to fix the houses and I'm quite happy how it turned out... will change change the red color later , I think  ... I made a block with eight houses in  a row so I dont have to plant them one my one / or Ctrl D them ...that was a big time save... as for the FPS I get it over 50 wich is as good as it gets on my CPU ... atm  its only houses , so it might go down later ,,, but it surely prove that your house package is great in a FPS-perspective ... so thanks again for this wonderful and fun asset.

/Ola784988dbc9.jpg78210df2a6.jpg


  • DPRoberts likes this




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users